Set up your Sonos ZP100

  • Mobile device required
  • Sonos S1 required

This article will guide you through setting up your ZP100. You can find more information on product features and specs in ZP100's product guide.

Before you start

  • Place your ZP100 in your desired location and connect it to power.

Set up a new Sonos system with ZP100

  1. Open the Sonos app for iOS or Android.
  2. Tap Set up a new system, then create or sign in to your Sonos account.
  3. Tap Continue > Set up products.
  4. Follow the steps in the app to set up your ZP100 and add your music services.

Add ZP100 to your existing Sonos system

  1. Open the Sonos app for iOS or Android.
  2. From the Settings tab, tap System > Add Product.
  3. Follow the steps in the app to connect ZP100 to your Sonos system.

Problems during setup?

If your ZP100 is having trouble connecting during setup, check our “Product not found” article for some help.

Audio inputs and outputs

Connect speakers

We recommend using a speaker wire gauge between 12 and 16. Runs of over 300ft are not recommended. Refer to our article on choosing a speaker wire gauge for more details.

  1. Use your thumb or finger to firmly push the spring-loaded speaker connector post inward to reveal the connection hole.
  2. Insert the stripped end of the speaker wire into the hole, then release. Repeat for the other speaker connections.

ZP100 works with traditional 8 ohm bookshelf speakers as well as pairs of 6 or 4 ohm speakers.

Speaker impedance

Watts per channel

8 Ohms

75 Watts

6 Ohms

112.5 Watts

4 Ohms

150 Watts

Please Note: Wattage is not a direct indicator of audio quality but represents required wattage for attached speakers.

Still need help?

Our technicians can help over the phone or with a live chat. You can also ask questions and find answers with other Sonos owners in our Sonos Community.